Starting a plot

• To start a plot, locate the gcode (.g) file in the “SD Files” panel and click the “Play” button (fig. 1, Fa).
• The plot should start after a short pause (10 seconds).
• You can pause and resume the plot from the “GRBL” panel (fig. 1, E) where a progress bar, “Pause” and “Cancel” buttons should appear.
• Note: essential to have zeroed all axis before plotting (fig. 3, C)!
• Note: After cancelling a plot, the UI will display an alarm.
• Click the “Alarm” button at the left of the message to clear the alarm.
• You will not be able to move the machine or start a new plot until it is cleared.