Connect to a personal network

• Use this feature to add the terraPen on your personal network, allowing you to browse the web whilst simultaneously controlling and monitoring the terraPen plotter.
• After connecting to the “TerraPen” access point and loading the UI click on the menu button (fig. 1, G) and then “Setup”.
• This will start the setup wizard.
• Click on “Start setup” Click “Continue” You will see the current WiFi configuration.
• This is the default Access Point mode , network name “TerraPen” and password which you can change if required.
• Role - To connect to your WiFi network, change the role from Access Point to WiFi Client and click the “Set” button, changing the colour should change to green.
• SSID - Next enter the SSID or network name of your WiFi network and click “Set”.
• Password - Enter the password for your WiFi network and click “Set”.
• Click “Continue” Click “Close” to finish Click “Yes” to restart the controller.
• The controller will then attempt to connect to your WiFI network.
• In a browser go to http://terrapen. local to connect to the UI or connect using its IP address to connect.
• Check your router for the assigned address (e.g. http://192.168.1.145).